October 4, 2011 Workshop 9 Notes

LIGHTING AND MATERIALS, RENDER FARMING

This workshop is developed after techniques described in the Robinson text,. it contains examples that are reinforced by background concepts in Chapters Chapter 14 + Chapter 15 (part), pages 349 402 

1. Shaders in Maya are based upon standard rendering algorithms and include the following types:  

These types of shaders are acessible through the hypershade dialog box or Window/Rendering Editors/Hypershade

2. Lighting types & 3 point lighting  - Chapter 14

Lighting types commonly used are 1) Ambient, 2) Distant/Directional, 3) Point and 4) Spot Light which appear from left to right in the Rendering Shelf tab in Maya. Ambient light provides general background illumination. A Distant/Directional light provides parallel light rays from a specific angular orientation, and may be used to mimic such distant lights as sunlight or moonlight. A point light is an omni-directional light that sends light out in all directions from a single location. A directional light sends light in a specific direction at a specific angle from a source location to a target location. 

 

Key and Fill Lighting: A typical three point lighting setup has a Spot light (also known as a Key light) to the upper right of model at full intensity to provide high contrast shadows, a Point light (also known as a fill light) to the upper left of the model at lower intensity filling in middle gray values, and a back spot light (also known as a back key light) at lower intensity than the front spot light and that provides some three-dimensional depth to the rendering.   

Key light set at full intenstity and positioned using the show manipulator tool (selected tool on left-hand side of Application window).



Full three point lighting setup and rendering. Back key light (spot light) being set into place on left. Rendering on right.

3. Materials Some Definition of Textures and Methods

Materials reference attribute nodes that determine look of an object. This includes

Texture – an material  that is mapped to object
      Types:  procedural (based on an algorithm) and
                    image (based on a photograph).

Bump Map – image read for its gray scale value that makes a material have the appearance of a surface relief

4. Menu items in Hypershade window (Left to Right)

Toggle bar – hide or show Create bar leaving more or less work area
Show top and bottom tabs - shows materials/textures as well as work area.
Show bottom tab - shows work area
Show top tab - shows materials/textures
Show previous graph (in work area)
Show next graph (in work area)
Clear Graph bar – clears out any nodes in work area
Rearrange graph bar – cleans up work area
Graph materials on select objects – finds material assigned to object
Show input connections
Show input and output connections
Show output connections

5. Basic material properties:

Color – RGB or HSV selection model color
Transparency – degree to which material is transparent
Ambient Color – brightness or darkness of whole material
Incandescence – create appearance of giving light
Bump mapping – makes a surface appear bumpy

6. Example of use of simple material definition and assignment

Change color of an object

 

  1. from Windows menu select Rendering Editors -> Hypershade
  2. Select create materials
  3. Click Lambert (cosine shaded object)
  4. Double click the new material to invoke attribute editor 
  5. Select field next to color on right-hand side of screen.
  6. Choose color from rgb or hsv model/accept




  7. Drag material with middle button onto surface from icon in work are to object. Or select surface and select material with right mouse button, select “Assign Material to Selection”


6. Texture mapping nurbs surface

Prepare brick.jpg file or somephoto.jpg file. Make a material from a lamber shader. In the color selection area on the right-hand side of  the the screen, select the checkered symbol and follow the dialog box to load the brick.jpg file.

Once the image map has been loaded into the definition of the material, it is included in the symbolic graph of the material (left-hand side of image below). Double-clicking on the Place2D texture tool activates interactive placement options.

  1. Nurbs surfaces U horizontal – V vertical map from lower left corner to upper right
  2. Can map TIF, JPG and Maya’s IFF
  3. Create Lambert material
  4. In Hypershade panel double click on icon.
  5. Add brick file to material
  6. Select object, right click on lambert material and assign to object
  7. Double click on pace2dTexture node
  8. See red square on object: middle mouse button - drag center to move, drag corners to rotate,
  9. Repeat UV … to repeat pattern (do 4 in each of U and V)

7. Ramp texture (eyeball)

  1. Create Phone E shader
  2. Double click on the icon (gets attributes window), and then click checkerboard icon on the color.
  3. Select ramp shader.
  4. Change top shader to black by lowering color solider to left.
  5. Move middle shader (default color is green) closer to top
  6. Click on ramp 1/5th way to bottom, place new position indicator just below 2nd one (above).
  7. Click and drag bottom indicator just below new one (3rd one).
  8. Click on color swatch for above indicator and select white.
  9. Change shader type to U Ramp and assign to sphere

8. Layered Shader

  1. Create two blinn shaders red and blue.
  2. In blue shade, double clock on icon, and then on transparency color select fractal.
  3. Create layered shader
  4. Double click on layered shader material.
  5. Drag blue and red materials from the Hypershade into the red square under Layered Shader Attributes. (note blue shader comes before red shader)
  6. Click X under original green shader to remove it.
  7. On blue blinn shader, use fractal to define transparency
  8. Apply shade a square
  9. In Render view, click on the Redo Previous Render Icon. Red can be seen through the blue due to fractal transparency.

9. Bump Map

  1. Create NURBS plane.
  2. Hypershade create Lambert and assign to plane via MMB.
  3. Double-click on Lambert sphere.
  4. Click map button next to bump mapping and select bulge.
  5. From Create Menu/Select Lights/Directional light.
  6. Use Show Manipulator Tool to rotate light onto plane.
  7. Select render icon (upper right hand side of screen) to see bump map..
  8. To change bump depth/chose graph materials on selected objects icon in hypershade panel and select lambert object.
  9. Select bump2d node, increase bump depth , & render (render icon)


10. Projection Map

  1. Create NURBS plane.
  2. Create a lambert material in Hypershade and apply to plane.
  3. Double-click on the lambert material in Hypershade
  4. In attribute editor, click on map next to color slider.
  5. Click on radio button to projector.
  6. Click the file button (select a file).
  7. Click file1 tab at top of attribute editor.
  8. Click on folder icon next to Image Name
  9. Open your own image.
  10. Goto perspective view and select key #6 to render.
  11. Select the place3d texture utility in the perspective view.
  12. Rotate plane -90 so that image projects onto NURBS plane.
  13. With the place 3d texture tool selected press ctrl/ctrl – a to open attribute editor.
  14. Click the “fit to box” button.
  15. Experiment with scale and move options.

[If surface appears to be moving through texture, then in Rendering mode, select the surface, and then from the Texturing menu select “Create Texture Reference Object”]

11. To Improve Quality of Rendering

  1. Select object.
  2. In hypershade panel, choose Graph Materials on Selected Objects Icon.
  3. Double-click on the material in Hypershade.
  4. In Attribute editor, under Hardware Texturing, click arrow to expand options.
  5. Change “Texture Quality” setting to High. {only do for temporary viewing, slows Maya down]

12. 3D Paint Tool

  1. Create Lambert material and assign it to a new NURBS sphere.
  2. Select the sphere.
  3. From Texturing Menu, select box next to 3D Paint Tool.
  4. Scroll down until you see File Textures.
  5. Click the Assign Textures button, determine resolution, and click Assign Textures {note project setup must include texture area
  6. In perspective view, hold “b” key and move mouse left & right to size brush.
  7. Click and drag on surface to paint.
  8. Select swatch next to floor color and choose yellow at top of Color Choose.
  9. Click “Flood Paint”
  10. Change paint color and paint smiley face on surface.
  11. Click on the change brush button, scroll down Visor and select hair folder.
  12. Choose hair type and paint on to sphere.
  13. Clear surface with flood button.
  14. Select brush adjacent to Artisan to return to normal brush.
  15. Decrease capacity of brush to see color beneath
  16. Can edit image in Photoshop directly from directory.
  17. [techniques can also be used for Attributes and Transparency, pull-down menu under file textures.

RENDER FARMING

The render farm server containts a cluster of central processing units for concentrated rendering. Two options allow you to use this technology. The first option is launched from within Maya and must be used within a restricted set of file lcoations, but doesn't require you to remain logged in to view the result. The second option is more easily launched within Maya without as many restrictions on file locations, but requires that you remain logged into a Maya session to see the result.

  1. setup of mental ray batch tool for Maya